The right side bracket has an extended flange at the top. HOLES TO MATCH SLOTS IN FLAG BRACKETS There are two flag brackets (left and right) provided. Step 4: Flag Bracket Installation RIGHT HAND FLAG BRACKET 5/16 X 1-5/8” LAG SCREW DRILL (2) 3/8” DIA. Leave extension spring with it’s sheave installed. Carefully unfasten the S-hook from the horizontal angle. By opening the door, you release most of the spring tension. Idrive™ Retro-fit Installation Step 1: Extension Spring Relief Raise the door to the fully open position and clamp locking pliers to the back legs of both vertical tracks, below the bottom rollers to prevent the door from falling (see Fig.
#Idrive garage door opener lights driver
Tools Needed: 1/8” Drill Bit 3/32” Drill Bit Tape Measure Power Drill Pencil 7/16” Socket 1/2” Socket 9/16” Socket 3/4” Socket Step Ladder 7/16” Wrench 1/2” Wrench 9/16” Wrench 3/4” Wrench Flat Head Screwdriver 7/16” Socket Driver Safety Glasses Phillips Head Screwdriver 3/8” Hex Wrench Ratchet Locking Pliers (2) Level Available Accessories: For idrive™ 3-Button Mini RF Transmitter Model no: 3973 Part no: 302083 Keyless Entry RF Transmitter Model no: KEP2 Part no: 302078 Low Headroom Kit Part Idrive™ Package Contents: 6’ Power Cord (1) Opener Three-button Transmitter (2) Wall Station Assembly Support Bracket Wall Station Reference Label Light Fixture Assembly w/ Screw & Diffuser Lock Arm Assembly Entrapment Label Owners Manual idrive™ Hardware Kit: 1/4 x 1-1/2” Hex Head Lag Screws (4) Disconnect Handle (1) “S” Hook (1) Disconnect Cable (1) M5 x. Package Contents: 3982 idrive™ Extension Spring Kit RH. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of FCC Rules. Table of Contents System Requirements Important Safety Instructions Package Contents Tools Needed Available Accessories idrive™ Retro-fit Installation Extension idrive™ Installation Pre-Operation Installation Operation Maintenance Troubleshooting Warranty Customer Service Number 2.
#Idrive garage door opener lights install
Use these instructions to install the extension spring kit with idrive™ Models: 3660-372/ 3661-372/ 3662-372/ 3760-372 Covered under one or more of the following U.S.
Hope, OH 44660 (888) 827-3667 Installation Instructions and Owner’s Manual Model 3982 idrive™ Extension Spring Kit.
0 kommentar(er)
